Replacing Memory
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
1 Touching only the top edge of the memory module,
locate the notch on the bottom edge.
NOTE: Each type of memory has a different notch
position. Incompatible memory modules cannot be
installed in the memory socket.
2 Look at the memory module socket for the tab that
matches the notch on the memory module.
— Removing and Replacing Memory
537486-001
3 Position the memory module over the socket, aligning
the notch with the tab in the socket, and then firmly
press the module down into the socket...
...until the retaining clips at the ends of the socket lock
the module into place.
5