HP Kayak XW A2-U2-W2 User Manual page 115

Boot Device
Configuration Menu
• Array 1000 BIOS
This option is enabled by default, and instructs the system to use the
special BIOS for the FastRAID option. If you disable this option and
re-boot, the system will use its normal BIOS and FastRAID will be
disabled.
• Advanced Configuration Options
Press to view the Advanced Configuration Options menu.
This menu lets you configure the SCSI boot device. To find out the
SCSI ID of a specific SCSI device, you can run the SCSI Disk Utilities
(refer to page 105).
Select SCSI peripheral from which to boot
To view peripheral by ID# select "SCSI Disk Utilities" from previous menu
Boot SCSI ID ................................................. 0
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled
Boot LUN Number .............................................. 0
Use the and
display a menu with a selection of values.
• Boot SCSI ID
This parameter is the SCSI ID of the device to boot on. The default
value is 0.
• Boot Lun Number
More advanced SCSI devices can have several logical units. This
option indicates the logical unit (or Lun) on which to boot for the
drive chosen in the
Configuring a SCSI Accessory Using SCSISelect
(only if HP FastRAID is installed)
Boot Device Configuration
keys to move between options. Press
. The default value is 0.
Boot SCSI ID
4 Technical Information
to
English 101