Recording Audio Cds - HP Compaq Presario,Presario EZ2700 Reference Manual

Recording
To achieve the best performance when recording audio CDs on a CD-RW drive,
Audio CDs complete the following steps:
1.
2.
3.
4.
5.
The source window will then show previously recorded tracks, or be blank if you are
using the disc for the first time.
6.
7.
8.
+ + + +
9.
* * * *
10. Select Finalize Disc.
2-24
From the just!audio main menu, select the CD-ROM tab.
Insert the source disc (the disc containing the tracks you want to record from).
Click and drag the desired tracks (songs) to the New CD window. This step will
copy the selected tracks to a temporary file on your hard drive.
When copying to the hard drive is complete, remove the source CD.
Insert the destination disc (the disc you want to record to), and wait until the
content list of the source disc clears from the source window. This step will take
approximately 10 seconds.
Ensure that Declick is not checked.
Click Record.
Once recording is complete, you will be prompted to finalize the disc. If you
would like to add additional tracks, repeat steps 2 through 8.
NOTE: When you have finalized a CD-R disc, no additional tracks can be recorded on
the disc.
Once you have completed recording your disc, click Options.
HINT: To test the system performance, Compaq recommends using the Emulate Only
option, located on the Options screen, when recording a new CD-R or using a
computer system for the first time. This allows you to perform a test run before
actually recording.
Features of Your Internet PC