Removing A Memory Module - HP Brio BA Upgrade Manual

Replacing a Memory Module

Removing a Memory Module

Removing a Memory Module
For your safety, disconnect the power cord and all external cables.
Caution
You will need:
• to have removed the cover. Refer to "Removing the Cover" on page 8.
• to have removed the system board. Refer to "Removing the System Board"
on page 12. You do not need to remove the cables from the system board, as
in step 3 on page 13.
The Procedure
1 Locate the memory module that you wish to remove.
2 Open both clips at each end of the module. Refer to step 2 on page 34.
3 Holding the memory module by its longest edges, pull it up and out of the
socket.
4 Replace the system board. Refer to "Replacing the System Board" on page
15.
5 Replace the cover. Refer to "Replacing the Cover" on page 10.
36