Installation & & F F Unction D D Escription - HP Designjet 10000s User Manual

1 Installation & & F F unction D D escription
1.1 Warnings f f or m m aintenance
The APS is delivered upright on a wooden pallet according to the IPPC standard. The following
industrial trucks are permitted for transporting the wooden pallets:
– Fork lift trucks and
– Fork stacker lift trucks.
Do not drop the APS during handling.
Secure the wooden pallets with the upright APS during transport to prevent the APS from falling
over.
Observe the applicable accident prevention and labour safety regulations.
You must observe the information on the packaging.
The APS or the wooden pallet with the APS is to be secured on the transport vehicle against slip-
ping and falling over.
Warning!
If the wooden pallets are not secured properly the APS may fall down and cause seri-
ous injury or death.
Only use suitable hoisting equipment and securing means!
The driver must be authorized to steer the industrial truck.
Drive between the spans of the wooden pallet using the fork lift truck.
Observe the following information for transporting the APS:
– The fork lift truck must be permitted for the total weight of the wooden pallets with
upright APS.
– Weight of the complete HP Designjet 8000s APS, net:
– Weight of the wooden pallet + 8000s APS + packaging:
– Weight of the complete HP Designjet 9000s/10000s APS, net:
– Weight of the wooden pallet + 9000s/10000s APS + packaging: approx. 113 kg
– The length of the forks must be at least:
– The transport crates must be tightly fixed to the industrial truck in order to avoid
them falling over.
It is to be prevented that the APS and the hoisting platform of the industrial truck come into
contact:
– For this purpose wedge a distance wood or cardboard between the packaging of
the APS and the platform.
– Avoid hard knocks when setting down the APS.
– All persons must leave the working area of the industrial truck before lifting the APS.
10
approx. 60 kg
approx. 76 kg
approx. 95 kg
1,000 mm
User´s Guide