To Set A Docking Password - HP OmniBook 900 User Manual

To set a docking password

Note
An administrative password must be set before you can set a user password. Refer to
the Reference Guide provided with your OmniBook for detailed information about
setting administrative passwords.
Password security protects access to your OmniBook. If you use password security,
you must enter the password at certain times (defined in Password Options). This is
how to specify a docking password.
Refer to your OmniBook Reference Guide for more detailed information on setting
passwords.
1. Close all applications, then shut down Windows and restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Use the right or left arrow keys select the Security menu, then use the up or
down arrow key to select Undock password.
Note: The boot password must be enabled before you can select Undock.
4. Press F5 or F6 to select Undock: Enabled.
5. Select Set User Password and type your password.
6. Save and exit Setup.
Using the Dock
1-19