Adjusting Gibs - Grizzly G0656 Owner's Manual

To set the 45˚ outward fence stop:
1. Disengage the swing stop (see Figure 23 on
Page 20).
2.
Using a sliding bevel adjusted to 135˚, adjust
the fence to the 135˚ (45˚ outward) position,
as shown in Figure 62.
Figure 63. 45˚ outward fence stop bolt.
4.
Adjust the 45˚ outward fence stop bolt until it
makes contact with the back of the fence.
5. Retighten the jam nut loosened in Step 3.
-38-
G0656 8" Jointer with Built-In Mobile Base