Grounding Instructions; 120-Volt Plug And Receptacle; 230-Volt Plug And Receptacle - Greenlee 555 Instruction Manual
555 electric bender 1/2" thru 2" rigid and thin-wall emt conduit 1-1/2" and 2" imc conduit
Hide thumbs
Also See for 555:
- Instruction manual (84 pages) ,
- Service manual (26 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
Grounding Instructions
Electric shock hazard:
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 15 amp GFCI-
protected circuit.
Failure to observe these warnings
can result in severe injury or death.
Greenlee Textron / Subsidiary of Textron Inc.
555 Electric Bender
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor and
a grounding plug as shown. Do not modify the plug.
Connect the plug to a corresponding GFCI-protected
receptacle that is properly installed and grounded in
accordance with all national and local codes and
ordinances.
Do not use an adapter.
120-Volt Plug and Receptacle
Plug
230-Volt Plug and Receptacle
Plug
5
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
Receptacle
Receptacle
Hide quick links:
Advertisement
Table of Contents
