12) POWER_LED
The PWR_LED connector is connected with the system power indicator to indicate whether the
system is on/off. It will blink when the system enters suspend mode(S1).
13) CI (Chassis Intrusion, Case Open)
This 2-pin connector allows your system to detect if the chassis cover is removed. You can check
the "Case Opened" status in BIOS Setup.
GA-MA69VM-S2 Motherboard
1
1
- 24 -
Pin No.
Definition
1
MPD+
2
MPD-
3
MPD-
Pin No.
Definition
1
Signal
2
GND