Installing The Tv Out Bracket - Gigabyte GA-MA69GM-S2H User Manual

5-3

Installing the TV Out Bracket

A TV output header is available on the motherboard (refer to page 28). Via the use of the TV out bracket,
you can connect a TV to your computer for output of video signals.
• Turn off your system and the power switch on the power supply before installing or
removing the TV out bracket to prevent damage to hardware.
• Securely insert the cable from the TV out bracket into the corresponding motherboard
connector (TV) when installing.
• Simultaneous output for D-Sub and TV (S-Video, AV composite, or YPbPr component) is not
supported. By default, when the onboard D-Sub and TV are connected at the same time, the
D-Sub monitor will be the primary display. To change the primary display to your TV, refer
to the instructions on the next page.
TV Out Bracket
S-Video
Y Pr Pb/AV
(HDTV Component
or AV Composite)
A. Installing the TV out bracket:
Step 3:
Refer to the figures below to connect your video device to the corresponding ports on the TV out bracket.
GA-MA69GM-S2H Motherboard
Connects to the TV
output connector
Step 1:
Secure the TV out
bracket to the chassis
back panel with a
screw.
S-Video Output
Y
Pr
Pb/AV Output
(Note) Simultaneous output for S-Video, AV composite, and YPbPr component
is not supported.
- 90 -
NTSC / PAL TV
HDTV
(Note)
NTSC / PAL TV
Step 2:
C o n n e c t T V o u t
bracket connector to
the motherboard TV
output header.
or
Projector
or
Projector