Gigabyte GA-MA69GM-S2H User Manual page 40

Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode
allows the system to silently perform unattended tasks while in a low-power mode that appears off
(Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard VGA.
PCI Slot Sets the PCI graphics card as the first display. (Default)
OnChipVGA Sets the onboard VGA as the first display.
PEG Sets the PCI Express graphics card on the PCIE_16 slot as the first display.
Surroundview
Enables or disables the SurroundView function. This option is configurable only if an ATI graphics
card is installed. (Default: Disabled)
Internal Graphics Mode
Auto Outputs from the onboard VGA if no PCI Express VGA card is installed. Always
outputs from the PCI Express VGA card when a PCI Express VGA card is
installed. (Default)
Disabled Always disables the onboard VGA, whether or not a PCI Express card is
installed.
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: Auto(default),
32MB, 64MB, 128MB, 256MB, 512MB, 1024MB.
Current UMA Size
When Frame Buffer Size is set to Auto, this item will show the system memory size automati-
cally allocated for the onboard graphics controller. If you manuanlly change the Frame Buffer
Size, this item will show the memory size you set.
GA-MA69GM-S2H Motherboard - 40 -