Pc Health Status - Gigabyte GA-M61PM-S2 User Manual

2-6

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Reset Case Open Status
Case Opened
Vcore
DDR2 1.8V
+3.3V
+12V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
System Warning Temperature
CPU Warning Temperature
CPU FAN Fail Warning
System FAN Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
: Move Enter: Select
F5: Previous Values
Reset Case Open Status
Disabled
Enabled
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR2 1.8V / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system fan speed status automatically.
System/CPU Warning Temperature
60 C / 140 F
o o
70 C / 158 F
o o
80 C / 176 F
o o
90 C / 194 F
o o
Disabled
CPU/System FAN Fail Warning
Disabled
Enabled
CPU Smart FAN Control
Disabled
Enabled
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
GA-M61PM-S2 (rev. 2.0) Motherboard
PC Health Status
[Disabled]
Yes
OK
OK
OK
OK
32 C
o
45 C
o
3245 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Don't reset case open status. (Default value)
Clear case open status at next boot.
Monitor System/CPU temperature at 60
Monitor System/CPU temperature at 70
Monitor System/CPU temperature at 80
Monitor System/CPU temperature at 90
Disable this function. (Default value)
Disable CPU/system fan fail warning function. (Default value)
Enable CPU/system fan fail warning function.
(Note)
Disable this function.
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements. (Default value)
- 42 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
C / 140 F.
o o
C / 158 F.
o o
C / 176 F.
o o
C / 194 F.
o o
Item Help
F1: General Help