Table of Contents
Advertisement
Onboard Serial Port 2
Auto
BIOS w ill autom atically s etup the port 2 address.
3F8/ IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/ IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default v alue)
3E8/ IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/ IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
UART Mod e Select
This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip.
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
IrDA
Set onboard I/O chip UAR T to IrDA Mode.
Normal
Set onboard I/O chip UAR T to Norm al Mode. (Default Value)
UR2 Duplex Mode
This feature allow s y ou to sec lect IR mode.
This function w ill av ailable w hen "UART Mode Select" doesn't set at Normal.
Half
IR Function Duplex Half. (Default v alue)
Full
IR F unction Duplex F ull.
Onboard Parallel port
This feature allow s y ou to select from a giv en set of parameters if the parallel port uses the onboard
I/O controller.
Disabled
Disable onboard LPT port.
378/ IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
278/ IRQ5
Enable onboard LPT port and address is 278/ IRQ5.
3BC/ IRQ7
Enable onboard LPT port and address is 3BC/ IRQ7.
Parallel Port Mode
This feature allow s y ou to connect w ith an adv anc ed printer v ia the port mode it supports.
SPP
Using Parallel port as Standard Parallel Port. (Default v alue)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Ex tended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
This feature allow s y ou to select Direc t Memory Access (DMA) channel if the ECP mode s elected.
This function w ill av ailable w hen "Parallel Port Mode" set at ECP or ECP+EPP.
3
Set ECP Mode Use DMA to 3. (Default v alue)
1
Set ECP Mode Use DMA to 1.
- 47 -
BIOS Setup
Advertisement
Table of Contents
