Gigabyte GA-8IPE1000 Pro-G User Manual page 88

Flash Ty pe/ Size... ... .... ... ... SST 49LF002A
[E nter] to continue updating B IO S or "ES C" to abort.
Enter: Run
3. Press Y button if you make sure to update BIOS.
Then it will begin to update BIOS. The progress of updating will be shown at the same time.
Flash Ty pe/ Size... ... .... ... ... SST 49LF002A
The porcess of
updating BIOS
Enter: Run
4. Press any keys to return to the Q-Flash
Flash Ty pe/ Size... ... .... ... ... SST 49LF002A
Enter: Run
5. Press Esc and then Enter to exit the Q-Flash
Flash Ty pe/ Size... ... .... ... ... SST 49LF002A
Enter: Run
6. Press Del to enter BIOS menu after system reboots and load BIOS Fail-Safe Defaults. See how
to load BIOS Fail-Safe Defaults, please kindly refer to Step 6 to 7 in Part One.
Congratulation!! You have updated BIOS successfully!!
GA-8IPE1000 Series Motherboard
Q-Flash Utility V1.30
CHECKSUM = AC03 Keep DMI DataE nable
Update B IOS from Floppy
Are you sure to update BI OS?
Save BIOS to Floppy
h/i: M ove
E SC: Reset
Q-Flash Utility V1.30
Updating BIOS Now...
Keep DMI DataE nable
>>>>>>> >>>>>>... ......... .....
Update B IOS from Floppy
Do not Turn Off Power On RESET System
Save BIOS to Floppy
h/i: M ove E SC: Reset
menu when the BIOS updating procedure is completed.
™
Q-Flash Utility V1.30
Keep DMI DataE nable
! ! Copy BIOS completed - pass !!
Update B IOS from Floppy
P lease press any key to continue. ...
Save BIOS to Floppy
h/i: M ove E SC: Reset
utility. System will restart.
™
Q-Flash Utility V1.30
Keep DMI DataE nable
Update B IOS from Floppy
A re you sure to RES ET?
[ Enter] to continue or [Esc] to abort.. .. Save BIOS to Floppy
h/i: M ove E SC: Reset
- 84 -
256K
You can press "Enter" to
continue updating BIOS
or "ESC" to abort.
F10: Power Off
256K
Do not turning off power
or reset your system at
this stage!!
F10: Power Off
256K
F10: Power Off
256K
F10: Power Off