Gigabyte GA-8IG1000 Pro-G User Manual page 31

12) F_AUDIO (Front Audio Connector)
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the
front audio header, your chassis must have front audio connector. Also please make sure the pin
assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis
you are buying support front audio connector, please contact your dealer. Please note, you can have
the alternative of using front audio connector or of using rear audio connector to play sound.
13) SUR_CEN
Please contact your nearest dealer for optional SUR_CEN cable.
Pin No.
1 2
9 10
Pin No.
1 2
7 8
- 27 -
Definition
1 MIC
2 GND
3 REF
4 Power
5 Front Audio (R)
6 Rear Audio (R)
7 Reserved
8 No Pin
9 Front Audio (L)
10 Rear Audio (L)
Definition
1 SUR OUTL
2 SUR OUTR
3 GND
4 No Pin
5 CENTER_OUT
6 BASS_OUT
7 AUX_L
8 AUX_R
Hardware Installation Process