Gigabyte GA-8IE800 User Manual page 67

STEP 6: Load BIOS defaults.
Normally the system redetects all devices after BIOS has been upgraded. Therefore, we
highly recommend reloading the BIOS defaults after BIOS has been upgraded. This
important step resets everything after the flash.
(1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up
screen will indicate your motherboard model and current BIOS version.
Amer ican
Meg atre nd s AMIBIOS (C ) 1 99 9 Amer ica n Me ga tr en d
7VTX F4
Che ck Syste m He alth OK
AMD -Athlo n(tm)Processor-900 MHz
Ch ecking NVR AM...
262144KB
Wa it...
Pre ss F1 to en ter D ual BIOS Utility. Pre ss ESC to q uit
Press a ny key to co ntiune
( C ) Amer ican Megatre nds In c.,
63-0001-001199-00101111-071595-VIA_K7-GA7VTX1-F
(2) Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the
arrows to highlight the item "LOAD SETUP DEFAULTS" then press "Enter". System will ask
"Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.
AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b
(C) 2001 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC: Quit hifg : Select Item
F6: Load BIOS Defaults
R el ea se :0 9/16 /9 9
INTEGRATED PERIPHERALS
HARDWARE MONITOR & MISC SETUP
SUPERVISOR PASSWORD
USER PASSWORD
Load Setup Defaults? (Y/N)?N
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
(Shift)F2 : Change Color
F7: Load Setup Defaults
Load Setup Defaults
- 63 -
F5: Old Values
F10:Save & Exit
Technical Reference