Gigabyte GA-8IE800 User Manual page 38

FOn-Chip P rimary PCI IDE
When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 1st channel IDE port. (Default value)
8Enabled
Disable onboard 1st channel IDE port.
8Disabled
FOn-Chip Secondary PCI IDE
When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 2nd channel IDE port. (Default value)
8Enabled
Disable onboard 2nd channel IDE port.
8Disabled
FIDE1 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and
8ATA66/100
cable is compatible with ATA66/100)
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable
8ATA33
is compatible with ATA33)
FIDE2 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and
8ATA66/100
cable is compatible with ATA66/100)
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable
8ATA33
is compatible with ATA33).
FUSB Controller
Disable this option if you are not using the onboard USB feature.
Enabled USB Controller. (Default value)
8Enabled
Disabled USB Controller.
8Disabled
GA-8IE800 Motherboard - 34 -