Standard Cmos Features - Gigabyte GA-8I955X Pro User Manual

Intel pentium processor extreme edition, intel pentium d / pentium 4 lga775 processor motherboard
Hide thumbs Also See for GA-8I955X Pro:
Table of Contents

Advertisement

2-1

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
Drive A
Drive B
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
: Move
Enter: Select
F3: Language
Date
The date format is <week>, <month>, <day>, <year>.
Week
The week, from Sun to Sat, determined by the BIOS and is display only
Month
The month, Jan. Through Dec.
Day
The day, from 1 to 31 (or the maximum allowed in the month)
Year
The year, from 1999 through 2098
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Device Setup. You can use one of three methods:
• Auto
Allows BIOS to automatically detect IDE devices during POST(default)
• None
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
• Manual
User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Capacity
Capacity of currently installed hard disk.
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.
Cylinder
Number of cylinders
Head
Number of heads
Precomp
Write precomp
Landing Zone Landing zone
Sector
Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.
GA-8I955X Royal/GA-8I955X Pro Motherboard - 32 -
Standard CMOS Features
Wed, Oct 27 2004
22:31:24
[None]
[None]
[1.44M, 3.5"]
[None]
[Disabled]
[All, But Keyboard]
640K
511M
512M
+/-/PU/PD: Value
F5: Previous Values
F6: Fail-Safe Defaults
Item Help
Menu Level
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
F10: Save
ESC: Exit
F7: Optimized Defaults
F1: General Help

Advertisement

Table of Contents
loading

Table of Contents