Gigabyte GA-8AENXP-DW User Manual page 41

ROM Boot Priority
Use this function to select onboard RAID or PCI SCSI boot ROM order if the boot ROM of your
device cannot be auto initiated.
SCSI
ICH6R
PROMISE
SATA
Password Check
Setup
System
CPU Hyper-Threading
Enabled
Disabled
Limit CPUID Max. to 3
Enabled
Disabled
No-Execute Memory Protect
Enabled
Disabled
CPU Enhanced Halt (C1E)
Enabled
Disabled
CPU Thermal Monitor 2 (TM2)
Enabled
Disabled
(Note) This item will show up when you install a processor that supports this function.
Set boot ROM order to SCSI devices..
Set boot ROM order to devices on the ICH6R controller.
Set boot ROM order to devices on the Promise controller.
Set boot ROM order to devices on the Sil3114 controller.
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
Enables CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported. (Default
value)
Disables CPU Hyper Threading.
Limit CPUID Maximum value to 3 when use older OS like NT4. (Default
value)
Disables CPUID Limit for windows XP.
(Note)
Enable No-Execute Memory Protect function.
Disable No-Execute Memory Protect function. (Default value)
(Note)
Enable CPU Enhanced Halt (C1E) function.
Disable CPU Enhanced Halt (C1E) function. (Default value)
(Note)
Enable CPU Thermal Monitor 2 (TM2) function.
Disable CPU Thermal Monitor 2 (TM2) function. (Default value)
- 41 - BIOS Setup