1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Router
  5. TEW-452BRP - 108Mbps Wireless Super G Broadband...
  6. User manual

TRENDnet TEW-452BRP - 108Mbps Wireless Super G Broadband Router User Manual

108mbps 802.11g wireless firewall router
Hide thumbs Also See for TEW-452BRP - 108Mbps Wireless Super G Broadband Router:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TEW-452BRP - 108Mbps Wireless Super G Broadband Router

Summary of Contents for TRENDnet TEW-452BRP - 108Mbps Wireless Super G Broadband Router

  • Page 2: Table Of Contents

    Contents Overview ....................1 Product Feature ................1 System Requirements ..............1 Applications ..................1 Getting Start....................2 Know the 108Mbps Wireless Router..........2 Connect to the 108Mbps Wireless Router ........3 2.2.1 Access the Setting Menu ............3 2.2.2 Quick Setup with Wizard ............5 Configuration...................13 LAN Setting ..................13 3.1.1 LAN &...
  • Page 3 Management...................38 3.6.1 SNMP...................38 3.6.2 Remote Management ............39 Tools ....................40 3.7.1 Restart .................40 3.7.2 Settings ................41 3.7.3 Firmware ................42 3.7.4 Ping Test ................43 Glossary ....................44...

  • Page 4: Overview

    1. Overview 1.1 Product Feature ● Compliance with IEEE 802.11g and 802.11b standards ● Highly efficient design mechanism to provide unbeatable performance ● Strong network security with WEP and 802.1X encryption ● Achieving data rate up to 54Mbps for 802.11g and 11Mps for 802.11b with wide range coverage;...

  • Page 5: Getting Start

    2. Getting Start 2.1 Know the 108Mbps Wireless Router Reset LAN Ports Power Detachable Antenna WAN Port...

  • Page 6: Connect To The 108Mbps Wireless Router

    LEDs: Color Status Description Indicates proper connection to power supply. Power Green The unit is not receiving power Indicates that the device is Status Green connected to the WLAN. Indicates connection to the WAN port Blinking Data transmission. Link is established WLAN Blinking Packet transmit or receive activity...
  • Page 7 The below window will popup. Please enter the user name and password. Both of the default is “admin”. Now, the main menu screen is popup.

  • Page 8: Quick Setup With Wizard

    2.2.2 Quick Setup with Wizard Setup wizard is provided as the part of the web configuration utility. You can simply follow the step-by-step process to get your wireless router configuration ready to run in 6 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear.
  • Page 9 Step2: Choose your time zone Select your time zone from the drop down list. Please click “Next” to continue. Step 3: Set LAN connection and DHCP server Set your IP address and mask. The default IP is 192.168.1.1. If you like to enable DHCP, please click “Enabled”.
  • Page 10 Step 4: Set Internet connection Select how the router will set up the Internet connection: Obtained IP automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP. Obtain IP automatically (DHCP client): If you have enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the router assign IP addresses automatically.
  • Page 11 address and DNS server. PPPoE to obtain IP automatically:...
  • Page 12 PPPoE with a fixed IP address:...
  • Page 13 PPTP:...
  • Page 14 L2TP:...
  • Page 15 Step 5: Set Wireless LAN connection Click “enable” to enable wireless LAN. If you enable the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router. Step 6: Restart The Setup wizard is now completed.

  • Page 16: Configuration

    3. Configuration 3.1 LAN Setting The screen enables you to configure the LAN & DHCP Server, set WAN parameters, create Administrator and User passwords, and set the local time, time zone, and dynamic DNS 3.1.1 LAN & DHCP Server This page enables you to set LAN and DHCP properties, such as the host name, IP address, subnet mask, and domain name.

  • Page 17: Wan

    the host name, IP address, and MAC address of the client. Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router. End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router.

  • Page 18: Password

    DNS 1/2/3: Type up to three DNS numbers in the text boxes. Your ISP will provide you with this information. MAC Address: If required by your ISP, type the MAC address of the router WAN interface in this field. DNS 1/2/3: Type up to three DNS numbers in the text boxes. Your ISP will provide you with this information.

  • Page 19: Time

    3.1.4 Time This screen enables you to set the time and date for the router's real-time clock, select your time zone, and enable or disable daylight saving. Local Time: Displays the local time and date. Time Zone: Select your time zone from the drop-down list. Daylight Saving: Enables you to enable or disable daylight saving time.

  • Page 20: Wireless

    3.2 Wireless This section enables you to set wireless communications parameters for the router's wireless LAN feature. 3.2.1 Basic This page allow you to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications.

  • Page 21: Authentication

    Enable/Disable: Enables and disables wireless LAN via the router. SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the router.
  • Page 22 Authentication Type: The authentication type default is set to open system. There are five options: Open System; Shared Key; WPA; WPA-PKS and 802.1X. WEP: Enable or Disabled. Mode: Select the level of encryption you want from the drop-down list. The router supports, 64- and 128-bit encryption.

  • Page 23: Advanced

    3.2.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow.

  • Page 24: Status

    3.3 Status This selection enables you to view the status of the router LAN, WAN connections, and view logs and statistics pertaining to connections and packet transfers. 3.3.1 Device Information This screen enables you to view the router LAN, Wireless and WAN configuration. Firmware Version: Displays the latest build of the router firmware interface.

  • Page 25: Log

    IP address, subnet mask, default gateway, and DNS. Click DHCP Release to release all IP addresses assigned to client stations connected to the WAN via the router. Click DHCP Renew to reassign IP addresses to client stations connected to the WAN. 3.3.2 This screen enables you to view a running log of router system statistics, events, and activities.

  • Page 26: Log Setting

    3.3.3 Log Setting This screen enables you to set router logging parameters. SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field. Send to: Type an email address for the log to be sent to. Click Email Log Now to immediately send the current log.

  • Page 27: Statistic

    3.3.4 Statistic This screen displays a table that shows the rate of packet transmission via the router LAN and WAN ports (in bytes per second). Click Reset to erase all statistics and begin logging statistics again. 3.3.5 Wireless This screen enables you to view information about wireless devices that are connected to the wireless router.

  • Page 28: Routing

    LAN via the router. MAC Address: Displays the devices wireless LAN interface MAC address. 3.4 Routing This selection enables you to set how the router forwards data: Static and Dynamic. Routing Table enables you to view the information created by the router that displays the network interconnection topology 3.4.1 Static...

  • Page 29: Dynamic

    Update: Select one of the entries in the static IP address table at the bottom of the page and, after changing parameters, click Update to confirm the changes. Delete: Select one of the entries in the static IP address table at the bottom of the page and click Delete to remove the entry.

  • Page 30: Routing Table

    3.4.3 Routing Table This screen enables you to view the routing table for the router. The routing table is a database created by the router that displays the network interconnection topology. Network Address: Displays the network IP address of the connected node. Network Mask: Displays the network (subnet) mask of the connected node.

  • Page 31: Filters

    3.5.1 Filters Using filters to deny or allow the users to access. Five types of filters to select: MAC, URL blocking, IP, Protocol filter and Domain blocking. MAC Filters: MAC Filter: Enables you to allow or deny Internet access to users within the LAN based upon the MAC address of their network interface.
  • Page 32 Click anywhere in the item. Once the line is selected, the fields automatically load the item's parameters, which you can edit.) Name: Type the name of the user to be permitted/denied access. MAC Address: Type the MAC address of the user's network interface. Add: Click to add the user to the list at the bottom of the page.
  • Page 33 IP Filters: This screen enables you to define a minimum and maximum IP address range filter; all IP addresses falling in the range are not allowed Internet access. The IP filter profiles are listed in the table at the bottom of the page. (Note: Click anywhere in the item. Once the line is selected, the fields automatically load the item's parameters, which you can edit.) Enable: Click to enable or disable the IP address filter.
  • Page 34 Domain Blocking: You could specify the domains that allow users to access or deny by clicking one of the two items. Also, add the specified domains in the text box.
  • Page 35 Protocol Filters: This screen enables you to allow and deny access based upon a communications protocol list you create. The protocol filter profiles are listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which you can edit:...

  • Page 36: Virtual Server

    3.5.2 Virtual Server This screen enables you to create a virtual server via the router. If the router is set as a virtual server, remote users requesting Web or FTP services through the WAN are directed to local servers in the LAN. The router redirects the request via the protocol and port numbers to the correct LAN server.

  • Page 37: Special Ap

    Add: Click to add the virtual server to the table at the bottom of the screen. Update: Click to update information for the virtual server if you have selected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list. New: Click New to erase all fields and enter new information.

  • Page 38: Dmz

    Trigger: Defines the outgoing communication that determines whether the user has legitimate access to the application. ● Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used to access the application. ● Port Range: Type the port range that can be used to access the application in the text boxes.

  • Page 39: Firewall Rule

    DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP address acts as a DMZ host with unlimited Internet access. Apply: Click to save the settings. 3.5.5 Firewall Rule This screen enables you to set up the firewall. The router provides basic firewall functions, by filtering all the packets that enter the router using a set of rules.
  • Page 40 ● IP Range End: Type the end IP address that the rule is applied to. Destination: Defines the destination of the incoming packet that the rule is applied to. ● Interface: Select which interface (WAN or LAN) the rule is applied to. ●...

  • Page 41: Management

    3.6 Management Management enables you to set up SNMP and Remote Management feature. 3.6.1 SNMP This screen enables you to configure SNMP. Enabled/Disabled: Click to enable or disable SNMP. System Name: Displays the name given to the router. System Location: Displays the location of the router (normally, the DNS name). System Contact: Displays the contact information for the person responsible for the router.

  • Page 42: Remote Management

    3.6.2 Remote Management This screen enables you to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management. HTTP: Enables you to set up HTTP access for remote management. ●...

  • Page 43: Tools

    IPSec: Enables you to set up IPSec access for remote management. IDENT: Default is stealth. This enables you to set port 113 stealth. 3.7 Tools This page enables you to restart the system, save and load different settings as profiles, restore factory default settings, run a setup wizard to configure router settings, upgrade the firmware, and ping remote IP addresses.

  • Page 44: Settings

    3.7.2 Settings This screen enables you to save your settings as a profile and load profiles for different circumstances. You can also load the factory default settings, and run a setup wizard to configure the router and router interface. Save Settings: Click to save the current configuration as a profile that you can load when necessary.

  • Page 45: Firmware

    3.7.3 Firmware This screen enables you to keep the router firmware up to date. Please follow the below instructions: Download the latest firmware from the manufacturer's Web site, and save it to your disk. Click Browse and go to the location of the downloaded firmware file. Select the file and click Upgrade to update the firmware to the latest release...

  • Page 46: Ping Test

    3.7.4 Ping Test The ping test enables you to determine whether an IP address or host is present on the Internet. Type the host name or IP address in the text box and click Ping.

  • Page 47: Glossary

    4. Glossary Access Point An interview networking device that seamlessly connects wired and wireless networks Authentication Authentication refers to the verification of a transmitted message’s integrity. DMZ (DeMilitarized Zone) is a part of a network that is located between a secure LAN and an insecure WAN.
  • Page 48 FTP (File Transfer Protocol) is used to transfer files over a TCP/IP network, and is typically used for transferring large files or uploading the HTML pages for a Web site to the Web server. Gateway Gateways are computers that convert protocols enabling different networks, applications, and operating systems to exchange information.
  • Page 49 MAC Address A MAC address is a unique serial number burned into hardware adapters, giving the adapter a unique identification. Metric A number that indicates how long a packet takes to get to its destination. MTU (Maximum Transmission/Transfer Unit) is the largest packet size that can be sent over a network.
  • Page 50 PPTP Point-to-Point Tunneling Protocol uses TCP to deal data for tunnel maintenance, and uses PPP for sum up the information carried within the tunnel. The data carried within the tunnel can be compressed or encrypted. The encryption method used is RSA RC4. PPTP can operate when the protocol is supported only on the client and the server located on the other end that the client is corresponds with.
  • Page 51 TCP/IP TCP/IP (Transmission Control Protocol/Internet Protocol) is the main Internet communications protocol. The TCP part ensures that data is completely sent and received at the other end. Another part of the TCP/IP protocol set is UDP, which is used to send data when accuracy and guaranteed packet delivery are not as important (for example, in real-time video and audio transmission).

  • Page 52: Limited Warranty

    Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Wireless Products – 3 Years Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDware shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product.
  • Page 53 LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDWARE NEITHER ASSUMES AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY CONNECTION WITH...

Table of Contents