The Router's Front Panel - NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual

Reference Manual for the ProSafe VPN Firewall 200 FVX538
• Resource CD for ProSafe VPN Firewall, including:
— This guide.
— Application Notes and other helpful information.
— ProSafe VPN Client Software - five user license.
• Warranty and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the firewall for repair.

The Router's Front Panel

The FVX538 ProSafe VPN Firewall 200 front panel shown below contains the port connections,
status LEDs, and the factory defaults reset button.
ProSafe VPN Firewall
Power Test
LED LED
Figure 2-1: FVX538 Front Panel
You can use the LEDs to verify various conditions.
front panel of the firewall and its operation.
Table 2-1. Object Descriptions
Object Activity
Power LED On (Green)
Off
Test LED On (Amber)
Blinking (Amber)
Off
2-6
1
Link/Act 100 Link/Act 100
Power
5
Test
Active Active
WAN1 WAN2
WAN1 Port WAN2 Port
and LEDs and LEDs
Description
Power is supplied to the firewall.
Power is not supplied to the firewall.
Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
January 2005
Link/Act 100
4
Link/Act
8
DMZ
LAN
LAN Ports Gigabit Port
and LEDs
DMZ Port
and LEDs
Table 2-1 lists and describes each object on the
MODEL
Gigabit
Speed
CONSOLE
Defaults
Factory
and LEDs Defaults
Console Button
Port
Introduction
FVX538
Factory