Specifying An Exposed Host - NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual

8. Click Apply. The rule will display in the Inbound Services table shown in
Figure 4-9
Your rule will now appear in the Inbound Services table of the Rules menu (see
This rule is different from a normal inbound port forwarding rule in that the Destination box
contains an IP Address other than your normal WAN IP Address.
Figure 4-10
To test the connection from a PC on the Internet, type http://<IP_address>, where
<IP_address> is the public IP address you have mapped to your Web server. You should see
the home page of your Web server.

Specifying an Exposed Host

Specifying an exposed host allows you to set up a computer or server that is available to anyone on
the Internet for services that you have not yet defined.
To expose one of the PCs on your LAN as this host:
Firewall Protection and Content Filtering
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, March 2009
Figure 4-10.
Figure 4-10).
4-15