Plu Maintenance - Casio TE-2200 Dealer's Manual

Application systems

PLU maintenance

There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU
maintenance.
Not found PLU maintenance
When an item which code is not existed in the scanning PLU file is registered, the "Not found" error occurs. You can
register this item by not found PLU maintenance procedure. After this maintenance, this item is registered without the "Not
found" error and stored in the PLU file.
Batch maintenance
Batch maintenance is used for adding items to the scanning PLU file, changing the scanning PLU item programming data
or deleting items from the scanning PLU file.
1 Program the batch maintenance PLU file.
2 Activate the batch maintenance file.
Register
Scanning
PLU file
Batch mainte-
nance PLU file
Direct maintenance
Direct maintenance is used for adding items to the scanning PLU file, or changing the scanning PLU item programming
data.
1 Program the direct maintenance PLU file.
1
Register
Scanning
PLU file
Direct mainte-
nance PLU file
176
1
2