Configuring Fax - Gateway M360 User Manual

Configuring Fax

Before you send your first fax, you need to set up your user information. Your fax cover
sheets and fax headers contain this information, some of which is required by law. The
Fax Configuration Wizard opens the first time you try to send a fax.
Important
To configure Microsoft Fax:
1
Click ,
Start
Fax Configuration Wizard opens.
2
On the Welcome to Fax Configuration Wizard screen, click
screen opens.
3
Type the information about yourself that you want to appear on your fax cover page,
then click
Next
4
Click the arrow to open the
are using to send and receive faxes.
5
If you want the modem to automatically answer the telephone in order to receive
faxes, click the
6
Click . The Transmitting Subscriber Identification (TSID) screen opens.
Next
The first time you run the Fax Configuration Wizard, you may need
to provide information in the Location Information and the Phone and
Modem Options dialog boxes.
,
All Programs Accessories
. The Select Device for Sending or Receiving Faxes screen opens.
Please select the fax device
check box.
Enable Receive
www.gateway.com
, ,
Communications Fax
list, then click the modem you
Installing and configuring Fax
, then click
Fax Console
. The Sender Information
Next
. The
31