Rack Mounting The 2626-Pwr And 2650-Pwr Switches - HP J4900B Installation And Getting Started Manual

Installing the Switch
Installation Procedures
E q u i p m e n t
The 12-24 screws supplied with the switch are the correct threading for
C a b i n e t standard EIA/TIA open 19-inch racks. If installing the switch in an equipment
cabinet such as a server cabinet, use the clips and screws that came with the
N o t e
cabinet in place of the 12-24 screws that are supplied with the switch.

Rack Mounting the 2626-PWR and 2650-PWR switches

1.
W A R N I N G
For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
2-12
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.