Table of Contents
Advertisement
5. Mount the Switch
After the modules and optional power supply are installed and you have
verified the switch passes self test, you are ready to mount the switch in a
stable location. The Series 5300xl Switches can be mounted in these ways:
Rack or Cabinet Mounting
The Series 5300xl Switches are designed to be mounted in any EIA-standard
19-inch telco rack or in an equipment cabinet such as a server cabinet. If you
are installing the switch in an equipment cabinet, please see the "Equipment
Cabinet Note" on
C a u t i o n
For safe operation, please read the "Installation Precautions" on
before mounting the switch.
1.
in a rack or cabinet
on a horizontal surface
on a wall
page
2-16.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 10-mm M4 screws.
For the Switch 5304xl and Switch 5348xl, each bracket is attached with
two screws, and for the Switch 5308xl and Switch 5372xl each bracket is
attached with three screws as shown in the illustrations on the next page.
Installing the Series 5300xl Switches
Installation Procedures
page 2-4
2-13
Advertisement
Table of Contents
