Figure 39. Router Summary Statistics - D-Link 502G - DSL Router - EN User Manual

The contents of the Summary folder differ depending on the mode of operation used by the device. In router
mode, the folder offers two additional screens, a DHCP table and a runtime routing table. In addition, the
Summary chart contains different information. In router mode, the information presented in the Summary screen
is as follows:
LAN IP Address Configuration
IP Address
Subnet Mask
MAC Address
PPP Login Information
Login User Name
Authentication
WAN (PPP) Information
IP Address
Connection Status
PVC Information (ATM Network Backbone)
VPI
VCI
Connection Information
Connection Type
Encapsulation Method
DHCP Configuration Information
Start IP Address
End IP Address
Netmask
Default Gateway
Leased Time
Primary DNS
Domain Name
State
NAT Function
DSL-502G ADSL Router User's Guide
Summary
Router LAN IP Address
Subnet Mask on LAN
Fixed Hardware ID of Router
User name used for PPP login
Method used for PPP
authentication
WAN IP address used for account
WAN connection status
Virtual Path Identifier
Virtual Circuit Identifier
Connection Protocol
Packet encapsulation method
Base LAN IP address used
Final LAN IP address available for
DHCP
Subnet Mask used for LAN
Gateway device LAN IP address
Device IP address lease time
DNS server IP address
LAN domain name used (if any)
DHCP state (enabled or disabled)
NAT
NAT function status (enabled or
disabled)

Figure 39. Router Summary Statistics

55