Playing An Audio Snapshot (Ex-M20 Only) - Casio EXS20 A EX-M20 User Manual

PLAYBACK

Playing an Audio Snapshot (EX-M20 Only)

Perform the steps below to display an audio snapshot
(indicated by a indicator) and play its audio.
1.
In the PLAY mode, use [ ] and [ ] until the
image you want is displayed.
2.
Press [SET].
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hod down [ ] or [ ].
Press [SET].
Press [ ] or [ ].
Press [MENU].
IMPORTANT!
• Audio volume can be adjusted only when playback is
being performed or is paused.
• When you have the LCD remote controller connected
to the camera, audio is output through the stereo
headphones (page 160) instead of the camera's
speaker. Output through the headphones is
monaural.
• The volume of audio recorded with the camera
cannot be adjusted using the LCD remote controller.
Use the camera's controller to adjust volume level in
this case.
79