Table of Contents
Advertisement
GETTING READY
Auto Power Off (APO)
Auto Power Off (APO) automatically turns off the camera
when you do not perform any operation for a certain
amount of time.
1.
Turn on the camera, and then align the mode
selector with "
" (REC) or "
2.
Press [MENU].
3.
Use [ ] and [ ] to select the "Set Up" tab.
4.
Use [ ] and [ ] to select "Auto Power Off",
and then press [ ].
• See page 37 for information about how to use
menus.
5.
" (PLAY).
36
Use [ ] and [ ] to change the currently
selected setting, and then press [SET].
To do this:
Set the Auto Power Off trigger time to
2 minutes
Set the Auto Power Off trigger time to
5 minutes
IMPORTANT!
• Auto Power Off is automatically disabled under any
one of the following conditions.
— While the camera is connected to a computer via
the USB cradle
— While a slideshow is playing
— While playing back a voice recording file (EX-M20
only)
Select this setting:
2 min
5 min
Advertisement
Table of Contents
