Advertisement
After setting all the parameters, align the cursor with [Execute] and then press one of the
function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph.
Calculation Result Output Example
σ
G σ
.......................... direction of test
1
2
F
..................................
p
.................................. p-value
o
................................. mean of sample 1 (Displayed only for Data: List setting.)
1
o
................................. mean of sample 2 (Displayed only for Data: List setting.)
2
σ
x
............................ standard deviation of sample 1
1
n
-1
σ
x
............................ standard deviation of sample 2
n
2
-1
n
................................. size of sample 1
1
n
................................. size of sample 2
2
You can use the following graph analysis functions after drawing a graph.
• 1(F) ... Displays
Pressing 1 (F) displays the
the corresponding location in the graph (unless the location is off the graph screen).
Two points are displayed in the case of a two-tail test. Use d and e to move the pointer.
Press i to clear the
F
• 2(P) ... Displays p-value.
Pressing 2 (P) displays the p-value at the bottom of the display without displaying the pointer.
Press i to clear the p-value.
# [Save Res] does not save the σ
line 2.
# V-Window settings are automatically
optimized for drawing the graph.
1-2-21
Tests (TEST)
F
value
F
value.
F
value at the bottom of the display, and displays the pointer at
value.
condition in
1
20010101
# Executing an analysis function automatically
F
stores the
and p values in alpha variables
F and P , respectively.
Advertisement
