Fitting the Blade and the Fan
Before using the lawnmower, always visually
inspect to see that blades and bolts are not
worn or damaged.
Never use more than 2 cutting height
spacers.
Spacers can only be fitted between the blade
and the fan and never between blade and the
bolt.
Q1 - Air Duct
Q2 - Air Cleaner Body
Q3 - Filter
Q4 - Latch Tabs
Q5 - Air Cleaner Cover
•
Check the filter before each use.
•
Clean every 25 hrs or more frequently when
used in dusty areas.
•
Replace filter every 200 hrs.
If you do not intend to use your lawnmower for
long periods it is advisable to follow this
procedure after use:
Cleaning - USE GLOVES
Keep your lawnmower clean
left in any of the air intakes, around the
engine or under the deck could become a
potential fire hazard.
Do not clean with chemicals, including petrol, or
solvents - some can destroy critical plastic
parts.
See 'Removing and Fitting
the Blade and Fan',
Transporting your Lawnmower
Removing & Fitting the Blade & Fan
Spark Plug
Cleaning the Air Filter
Caring for your Lawnmower
(K)
grass clippings
(P3)
(P5)
(P2)
(P7)
(P8)
(P9)
If the filter is dirty:-
Storing Your Lawnmower
At the end of the Mowing Season
Disconnect the spark plug lead.
Do not re-connect the spark plug lead.
'Removing and Fitting the Blade and Fan' for
complete instructions.
Products Service Centre/Dealer
(P6)
(P3)
Figure P
(P1)
(K)
'Cleaning the Air Filter'.
See
See 'Cleaning'.
Electrolux Outdoor
ENGLISH - 4