Advertisement
Available languages
Available languages
Prior to use
No-Picture Problem
If no picture is displayed on the monitor even after the following remedial action is taken, contact your local dealer.
1. Check the Power indicator.
Symptom
No picture
For the setting of the brightness, contrast and gain, please refer to the User's Manual on the CD-ROM.
*
1
2. Check the error message that remains on the screen.
(PC Input / HDMI (PC Signal) Input)
Symptom
Example:
PC
Signal Error
3. Check [Information] of the Setting menu.
on the remote control, choose [Information] with
(Press
Symptom
Example:
Information(HDMI1)
Return
FORIS
FX2431
S/N:********
Usage Time
******** H
Input Signal
Signal Error
[ENTER]: Return
"Signal Error" is displayed.
Installation
Setting/Adjustment
Status
Power indicator does not light
up.
Power indicator lights blue.
Power indicator lights orange.
Status
The message left shows that
the input signal is out of the
specified frequency range.
* Current input signal can be
checked in [Information]
menu. (The signal frequency
that is out of the range is
displayed in magenta.)
Status
The message left shows that
the signal is not input from the
device or the signal from the
device is outside the
specification.
Troubleshooting
Possible cause and remedy
• Check whether the power cord is correctly
connected.
• Check whether the main power switch is on.
• Press
on the remote control (or on the
monitor).
Check whether the device is connected
correctly.
(PC Input / HDMI (PC Signal) Input)
Set each adjusting value in [Brightness],
1
[Contrast] and [Gain] *
to higher level.
(VIDEO Input / HDMI (Video Signal) Input)
Check whether the power of the connected
device is turned on.
(PC Input / HDMI (PC Signal) Input)
• Press a key on the keyboard or click the
mouse.
• Turn on the PC.
Possible cause and remedy
Change the mode appropriately using the
graphics board's utility software. Refer to the
manual of the graphics board for details.
or
, and then press
Possible cause and remedy
• Check whether the device is connected
correctly.
• Check whether the power of the connected
device is turned on.
• Confirm the output signal format by referring
to the instruction manual of the connected
device.
.)
17
Advertisement
