Cisco 1760 - VPN Bundle Router Hardware Installation Manual page 91

Appendix C Installing and Upgrading Memory and Packet Voice Data Modules
Figure C-6 Installing a PVDM
1
Step 3
Step 4
Caution
Step 5
78-13342-03
2
If only one module is to be installed, install it into PVDM slot 0.
Face the front panel of the router. Insert the module vertically into the PVDM slot.
Orient the module so that the indexing slot in the connector (bottom edge) of the
module is lined up with the indexing tab inside the PVDM slot, and so that all
electrical connections are made.
Handle PVDMs by the edges only. PVDMs are ESD-sensitive components and
can be damaged by mishandling.
Holding the module firmly in the slot, rotate it toward the rear of the router, until
you hear a clicking sound and the module is firmly seated in the slot. Make sure
that the snaps on both ends of the PVDM are engaged.
Cisco 1760 Modular Access Router Hardware Installation Guide
Snaps
Installing a PVDM
C-9