Figure 6
Mounting the Controller on the Wall
Front panel (facing down)
1
#10-32 flat head screws
2
After the controller is mounted on the wall, perform the following tasks to complete the
Step 3
installation:
Connecting the Controller Console Port
•
Securing the Power Adapter Cable
•
•
Connecting to the Network
For configuration instructions about using the CLI setup program, see the
Step 4
Bootup Script and Power-On Self Test" section on page
Mounting the Controller on a Wall (Mounting Screws)
When mounting the 2504 controller on a wall using mounting screws, always mount the controller
with the front panel facing down.
1
Wall mounting screws
3
2
3
"Running the
23.
15