Wall-Mounting - Cisco 1720 Hardware Installation Manual

Wall-Mounting

Cisco 1700 Router Hardware Installation Guide
2-14
The Cisco 1700 router can be wall-mounted using two number 6, 3/4-inch screws
and the molded mounting brackets on the bottom of the hub. You must provide the
screws. We recommend using pan-head or round-head screws.
Figure 2-7 Wall-Mount Brackets—Bottom of Router
Mounting
bracket
Bottom
of router
Mounting
bracket
To mount the router on a wall or other surface:
Step 1
Chapter 2
Front panel of router
3.75"
(9.52 cm)
Install the two screws 3.75 inches (9.52 centimeters)
horizontally apart on a wall or other vertical surface.
The screws should protrude 0.25 inches (0.64
centimeters) from the surface of the wall.
Installing the Cisco 1700 Router
78-5405-03