TRENDnet User's Guide
Log
These settings display the Current Log of the device. Click the Clear
button to reset the log or click the Download
file in txt format.
For more monitoring features, please refer to SecurView Pro software user's guide for
details.
© Copyright 2012 TRENDnet. All Rights Reserved.
How to setup/access the camera remotely
You can either setup the Dynamic DNS connection via camera itself or your home
button to download a
router. An account from any of the listed DDNS providers is required prior to this
operation.
Configure DDNS on your Camera
1. Go to Camera's DDNS Setting page, click Enable to activate the feature. Then
select a DDNS provider from the list.
2. Enter your DDNS's the Host Name, User Name and Password.
3. In the Port Number section, assign an HTTP port of the camera. The default
HTTP Port on the camera is 80. The example shows above is using port number
9000.
4. Open another web browser and go to your Router's Web Configuration page.
(In the example, TRENDnet's TEW-651BR Wireless N router is used)
TV-IP572P / TV-IP572PI
26