Advertisement
Using the TV-IP322P with an Injector (TPE-111GI)
Power + Data (PoE)
TV-IP322P
1. Connect one end of the Power Cord to the
Injector. Then connect the other end of the
Power Cord to an outlet.
2. Connect a network cable from a switch or router
to the TPE-111GI's DATA IN port.
3. Connect a network cable from the TV-IP322P to
the TPE-111GI's DATA OUT port.
4. Follow the steps in Section 3: Configure the IP
Camera.
Power
Data
TPE-111GI
3
Power
Jack
TEW-639GR
Internet
Cable/DSL
Modem
Advertisement
