Advertisement
INSTALLATION
Precaution
Before the installation, make sure the USB port
exists in your computer and is enabled. To check
this,
go
Panel?System. Open the Device Manager tab.
If the Universal Serial Bus controller device is
found, it means your USB port is installed and
enabled. If not, either no USB port is installed or
the USB bios is not properly enabled. In this
case, consult your computer dealer for USB
support.
Getting Hooked Up
1. Locate the USB host port of your system.
Align the USB connector toward the USB host
port, push evenly and steadily until it is seated.
to
My
- 3 -
Computer?Control
Advertisement
