Hardware Installation; Hardware Recognition - TRENDnet TU-ET10 User Manual

Universal serial bus ethernet adapter

Hide thumbs Also See for TU-ET10:

Table of Contents

Enlarged version

ow you can experience a true plug-and-play

Network device easier than ever. The USB

(Universal Serial Bus) Network Adapter allows

you to connect a 10Mbps network from an

USB-enabled PC, notebook, or USB HUB.

With instant hardware recognition from

Windows 98 and "Hot Swap" feature from USB

specification, you don't need to be a MIS

specialist to operate it. Just simply hook up the

USB cable at one end and plug a standard twist

pair (RJ45) network cable in the other end, and

you will be networked within no time!

Package Contents:

USB Network Adapter

One USB cable

One Driver Disk

User's guide

Hardware Installation

Note: Before you install USB LAN adapter,

please check the USB port is in your PC and

enabled. You need to have USB port enabled to

continue the next step. Otherwise, please

STOP

this installation.

Table of Contents