TRENDnet TPL-310AP User Manual page 55

Hide thumbs Also See for TPL-310AP:
Table of Contents

Advertisement

Wireless
Modulation
Access Point Modes
Frequency Band
Data Rate***
Security
Antenna
Channel
Output Power
Receiver Sensitivity
* Maximum of 16 adapters (nodes) recommended for streaming video across your network. Additional
adapters may decrease performance.
** 200Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary depending
on environment.
***Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building materials
and other conditions.
**** Networked Powerline devices need to be plugged into power outlets that are on the same elec-
trical system.
*****It is not recommended to use this product on electrical systems that use AFCI circuit breakers or
plugged into GFI protected outlets as this may cause performance degradation or loss in connectivity.
OFDM with BPSK, QPSK, 16QAM, and 64QAM
Access Point (AP)
Access Point (AP) Client (wireless adapter)
Wireless Distribution System (WDS)
Wireless Distribution System (WDS) with Access Point (AP)
Mesh
Mesh with Access Point (AP)
Repeater (using AP mode only)
2.412GHz ~ 2.472GHz
802.11b: 1,2,5.5, and 11Mbps
802.11g: 6,9,12,18,24,36,48 and 54Mbps
802.11n: up to 300 Mbps
64/128-Bit WEP (HEX & ASCII), WPA/WPA2 RADIUS, WPA/WPA2-
PSK
2 x 2dBi internal printed dipole antennas
2.4GHz: 1~11 (FCC), 1~13 (ETSI)
16dBm typically @ 802.11b
14dBm typically @ 802.11g
13dBm typically @ 802.11n
802.11n Typical -68 dBm
802.11g Typical -73 dBm
802.11b Typical -84 dBm

Advertisement

Table of Contents
loading

Table of Contents