Table of Contents
Advertisement
3.4.4 Active Wireless Client Table
This is the window that pops up after clicking the
information on wireless currently connected to each SSID including the primary.
3.4.5 Advanced Settings
You can set advanced wireless LAN parameters of this AP.
Note: The settings on this page are intended for more advanced users who have sufficient knowledge
of wireless LAN technology. Please do not modify these settings unless you are well aware of the
effects on the wireless access point functionality and performance as a result of these changes.
Items
Fragment Threshold
RTS Threshold
Beacon Interval
This value should remain at its default setting of 2346. If you
experience a high packet error rate, you may slightly increase your
fragmentation threshold within the value range of 256 to 2346.
Setting the fragmentation threshold too low may result in poor
performance.
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 0 and 2347 are
recommended.
Beacons are packets sent by an access point to synchronize a
button. This will display
Information
Advertisement
Table of Contents
