Installation Instructions - Danby DAC5110M Owner's Use And Care Manual

Interior Air Inlet
Control Panel
Interior Air Inlet
ELECTRIC SHOCK HAZARD
injury, disconnect power to the unit before installing or servicing.
TOOLS NEEDED FOR
INSTALLATION:
• Screw Drivers: Phillips and
flat head.
• Power Drill: 1/8" diameter
drill bit.
• Pencil
• Measuring Tape
• Scissors
• Carpenters Level
CAUTION: Because the compressor is located on the
controls side of the unit (left side), this side will be heavier and
more awkward to manipulate. Inadequate support on control
side of the unit can result in personal injury and damage to
your unit and property. Therefore, it is recommended that you
have someone assist you during the installation of this unit.
FEATURES

INSTALLATION INSTRUCTIONS

: To avoid the possibility of personal
NOTE: Save the shipping carton
and packing materials for future
storage or transportation. From
carton, remove the plastic bag
containing the installation
hardware kit necessary for the
installation of your air
conditioner. Please check the
contents of hardware kit against
the corresponding model check
list, prior to installation of the
unit. See Fig. 1.
Exterior
Air Inlet
Air FIlter
INSTALLATION HARDWARE
3/8" screws (4)
Fig. 1
3
Cabinet
3/4" screws (9)
Safety Lock (1)
L shaped
mounting
bracket (1)
Adhesive
Foam Seal (1)
Regular Foam
Seal (1)
Frame Lock
(2)
Side Curtain RH (1)
Side Curtain LH (1)