Table of Contents
Advertisement
Wireless LAN card user's guide
Installation Procedure
1. Unpack the tgz file by typing the following line at the shell
prompt, (assuming the shell prompt is >).
2. Configure and install wlan v0.1.6. Be sure to configure the
build as Station (STA)—do not choose Access Point (AP)
because there is no firmware available that supports the AP
function.
3. Edit /etc/pcmcia/wlan-ng.conf by adding the following lines
to the bottom of the file.
4. Edit /etc/pcmcia /wlan-ng.opts. The fields to edit are listed
below:
5. Restart your computer.
32
>gzip -cd wlan-ng-0.1.6.tgz | tar xvf -
>cd wlan-ng-0.1.6
>make config
>make all
>make install
card "PCMCIA 11M WLAN"
manfid 0x0274, 0x1601
bind "prism2_cs"
dot11DesireSSID
APSSID
APCHANNEL
>shutdown -r now
Advertisement
Table of Contents
