Table of Contents
Advertisement
Wireless LAN card user's guide
Driver installation for Windows NT 4.0
This installation procedure assumes that you have installed the net-
work components (i.e. Network Clients and Protocols) in your
NT4.0.
To check whether the network components have been installed,
double click the Network icon in the Control Panel. If it has not
been installed, refer to the Windows NT 4.0 installation guide for
instructions on installing the component.
Follow the steps below to install the driver.
1. Insert the Wireless LAN card into an available PCMCIA
slot on your Notebook (refer to page 6 - Inserting the Wire-
less LAN card).
2. Login to NT 4.0 as Administrator.
3. Double click the Network icon in the Control Panel, and
select the Adapters tab as shown in the following screen:
24
Advertisement
Table of Contents
