Getting Started - TRENDnet TEW-637AP Manual

Getting Started

For a typical wireless setup at home or office, please do the following:
1. Connect one end of the provided network cable into your computer's network port, and connect the
other end of the provided network cable into the TEW-637AP's Ethernet port.
2. Plug the power adapter to outlay, and connect the power jack to the TEW-637AP.
3. Verify that the Power & Ethernet LEDs are lit.
4. Insert Setup Wizard CD into your CD-ROM drive.
5. The Welcome screen appears on your monitor. Click Start button.
6. Read the License Agreement and click Next to continue the installation.
7. Connect an Ethernet cable from the LAN port on your Router to the LAN port on the TEW-638APB,
click Next button to continue.
Page 11