Chapter 3. Ap Mode Configuration; External Network Connection; Network Requirement - TRENDnet TEW-455APBO User Manual

Chapter 3. AP Mode Configuration
When AP mode is chosen, the system can be configured as an Access Point. This section provides detailed
explanation for users to configure in the AP mode with help of illustrations. In the AP mode, functions listed in
the table below are also available from the Web‐based GUI interface.
Option
Operating Mode
Functions
Time Server
3.1 External Network Connection
3.1.1 Network Requirement
Normally, TEW‐455APBO connects to a wired LAN and provides a wireless connection point to associate with
wireless client as shown in Figure 3‐1. Then, Wireless clients could access to LAN or Internet by associating
themselves with TEW‐455APBO set in AP mode.
System
General Settings
LAN Advanced Settings
SNMP
UPNP
Table 3‐1: AP Mode Functions
Figure 3‐1 Access Point on a Wired LAN Configuration
TEW‐455APBO High Power Wireless Outdoor PoE Access Point
Wireless
Profiles Settings
Virtual AP Firmware Upgrade
WDS Setup
16
Administrator
Management
Network Utility
Reboot
User Manual
Status
System Overview
Clients
WDS Status
Extra Info
Event Log