Log Settings; Statistic - TRENDnet TEW-311BRP User Manual

Wireless Router user's manual

Log Settings

This screen enables you to set router logging parameters.
SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field.
Send to: Type an email address for the log to be sent to. Click Email Log Now to immediately send the current
log.
Syslog Server: Type the IP address of the Syslog Server if you want the router to listen and receive incoming
SysLog messages.
Log Type: Enables you to select what items will be included in the log:
•
System Activity: Displays information related to router operation.
•
Debug Information: Displays information related to errors and system malfunction.
•
Attacks: Displays information about any malicious activity on the network.
•
Dropped Packets: Displays information about packets that have not been transferred successfully.
•
Notice: Displays important notices by the system administrator.

Statistic

This screen displays a table that shows the rate of packet transmission via the router LAN, wireless LAN, and
WAN ports (in bytes per second).
Click Reset to erase all statistics and begin logging statistics again.
Utilization: Separates packet transmission statistics into send and receive categories. Peak indicates the
maximum packet transmission recorded since logging began, while Average indicates the average of the total
packet transmission since recording began.
– 36 –