The Insert Menu - E-Mu 1212M Owner's Manual

The Insert Menu

Right-Clicking over the insert section brings up a pop-up selection box containing
various insert options to help you control and manage your inserts.
To Add a Send Insert:
This type of insert send splits the signal at the insert point and sends it out to the selected
destination. (An "ASIO Send" becomes an input on your recording application, a
"Physical Out" goes to a pair of output jacks. the signal also continues down the strip to
the Aux Sends and main mixer outputs.)
Right-Click over the Insert section. A pop-up dialog box appears.
1.
Select "Insert Send" (to ASIO/WAVE or physical output) from the list of options. The
2.
following dialog box appears.
Choose one of the Send Outputs. Click on a destination to select it.
3.
Click OK to select the output or Cancel to cancel the operation.
4.
To Add a Send/Return Insert:
This type of insert send breaks the signal at the insert point and sends it out to the
selected destination such as an external effect processor. A return source signal is also
selected which returns the signal to the channel strip after processing.
Right-Click over the Insert section. A pop-up dialog box appears.
1.
Select "Insert Send/Return (Physical Output and Input)" from the list of options.
2.
The following dialog box appears.
E-MU Digital Audio System
From Left Input
To connect an input to your recording
software: Add a Host ASIO Insert.
Input
Insert
Send
Panning
Fader
Aux 1 Bus
Aux 2 Bus
Main Output Bus
4 - The PatchMix DSP Mixer
To
Recording
Application
To ASIO, WAV or
Physical Output
Mixer Strip Creation
39