Table of Contents
Advertisement
DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER'S MANUAL
SETUP screen
Set Channel
{ XE "MAIN MENU:Fav. Lists" } Using the , , , and
keys, highlight one of the nine channel
boxes. You can enter the desired channel using the number keys on the remote control, or by using the
and
. Pressing
while highlighting one of the channel boxes will also initiate a pop-up
panel that will allow you to set the channel using the
and
keys on the remote control or the digital
satellite receiver's front panel.
Installation
{ XE "SETUP MENU:Dish Pointing" } The INSTALLATION screen provides the utilities that makes
the setup and testing of your system simple and convenient.
The INSTALLATION screen
Places to go from the INSTALLATION screen
System Test
The System Test button takes you to the SYSTEM TEST screen.
Things to do in the INSTALLATION screen
Here, the quality of the satellite signal is automatically displayed. In addition to using this at
installation time, you can use it to troubleshoot if you experience loss of signal, momentary video
freezing, or similar problems.
Transponder #
You may want to try different transponders troubleshoot satellite signal reception problems. Each
transponder transmits multiple programs at a time. The transponder shown when the screen first
displays represents the one associated with the last viewed program. By moving the highlight to the
transponder area, you can enter a number from 01 to 32. Different transponders may show varying
signal strengths. This is normal unless the variations are extreme (such as 40 and 90). In the event of
signal reception problems, customer service representatives may ask for signal strength on a different
transponder. Do not change transponders trying to find the best signal since the transponder will
automatically change depending on the channel you want to view.
Another signal strength utility that you may find useful is the Cable Test that can be found in the
SYSTEM TEST screen.
Position
After selecting Position from the INSTALLATION screen a pop-up menu called Alignment Mode
will appear. You can enter your location by either Align by ZIP or Align by LAT/LONG. After making
your selection, the appropriate pop-up entry panel will appear. Use the
and
keys or use the
P
7-14
AGE
Advertisement
Table of Contents
