Table of Contents
Advertisement
THE DIGITAL SATELLITE RECEIVER'S MENU SYSTEM
Lock/Unlock
{ XE "MAIN MENU:Lock" } When you first receive your satellite system, it will be unlocked; (i.e., no
limits or restrictions are in effect). To enforce the limits (spending, ratings, and "Family" favorite list),
you must lock the system.
When the button on the MAIN MENU reads Lock, no lock symbol appears at the top of the menu
screen, indicating that the system is unlocked.
NOTE: Once the digital satellite receiver is locked, only existing Family list channels will be
accessible. If the Family list has not had channels added to it, no channels can be viewed without
first unlocking the digital satellite receiver. To avoid this inconvenience, verify the contents of the
Family list before locking the digital satellite receiver.
Locking Procedure
When the Lock button is selected, the LOCK SYSTEM{ XE "LOCK SYSTEM screen" } { XE "LOCK
The LOCK pop-up panel
REMEMBER YOUR CODE! You will need this code whenever you wish to override the lock or to
unlock the digital satellite receiver.
Unlocking Procedure
{ XE "MAIN MENU:Unlock" } { XE "Unlock" \t "See SYSTEM UNLOCK" } To remove the lock and
The UNLOCK pop-up panel
SYSTEM" \t "also see Unlock" } pop-up panel is displayed. Use the
and
keys or the remote control number keys to enter a four-digit
passcode of your choosing. If you enter the code using the number
keys, you will not see the numbers appear on the screen. After
entering a four-digit passcode, highlight and select OK to proceed.
Otherwise, choose Cancel to cancel the locking process.
If you continue, you will be asked to confirm the code by entering it
again in the same fashion as before. Once again, highlight and select
OK to proceed. Otherwise, choose Cancel.
Once OK has been selected, the digital satellite receiver is locked.
The button previously used to lock your system is now used to
unlock your receiver. A lock symbol appears at the top of every
menu screen to remind you that the digital satellite receiver is
locked.
its restrictions, highlight the Unlock button and press the
When the SYSTEM UNLOCK{ XE "SYSTEM UNLOCK screen"
} { XE "SYSTEM UNLOCK" \t "also see Lock, and Lock Override"
} pop-up panel appears, you can use the
control number keys to enter the four-digit passcode that you used to
lock the digital satellite receiver earlier. If you enter the code using
the number keys, you will not see the numbers appear on the screen.
After entering the passcode, highlight and select OK. Once the
digital satellite receiver has been unlocked, all limits and
restrictions are removed! Otherwise, choose Cancel to keep the
lock in effect.
If you forget your four-digit code, call your service provider for
assistance.
key.
and
keys or the remote
P
7-7
AGE
Advertisement
Table of Contents
